The Peak 209C is a fully featured 9,000-lb. capacity lift with Super-Symmetric arms.
Super-Symmetric is a unique arm style that utilizes 3-stage front arms and 2-stage rear arms.
The 3-stage front arms allow asymmetric loading when the front arms are retracted and symmetric loading when the front arms are extended.
The 209C also has a single point safety release system and two direct-drive cylinders.
This commercial grade lift also has two height positions that allow for installation under a 12' ceiling or extended to 12' 6".
Twelve stacking height adapters are included along with four U shaped adapters that lock onto truck frames. he Peak 209C is an overhead beam style clear-floor design with a padded shut-off bar for overhead vehicle protection.
The factory provides a one-year parts and five year structure warranty

The Apex PL10 is an ETL/ALI Certified 10,000 lb capacity two post lift with three stage front arms and direct drive hydraulic cylinders. It is designed to lift a wide range of vehicles including diesel pickup trucks. The PL10 is heavy duty in every aspect. It is built by Dover Corp, the world’s oldest and largest lift company. Height adjustable columns can allow the lift to be installed at 12’ or 12’ 6”. The arm pad height is only 3 5/8” and three different sizes of truck adapters are included for each arm.

The Apex PL10 has a 12 month parts and five year structural warranties.

The Apex PL10 is manufactured by the VSG division of eight billion dollar Fortune 300 Dover Corp NYSE (DOV). The Vehicle Service Group (VSG) division of Dover Corp is headquartered in Madison Indiana. To insure consistent quality, all lifts are manufactured in Dover owned ISO9001 certified factories. Dover is the largest lift manufacturer in the world and has been manufacturing automotive lifts for over 85 years. Rotary Lift, Direct lift, and Revolution Lift are also owned by Dover Corp

The Forward I10 is a Heavy Duty Commercial Grade 10,000 lbs. capacity ETL/ALI Certified lift designed for high volume shops. The I10 offers Three Stage Spot-Rite Arms that allow you to set the vehicle up Symmetric or Asymmetric. The extra low 3 5/8” pad height allows the arms to swing easily under low vehicles. The versatile combination of features is ideal for small wheel based cars and quad cab pickup trucks. The powder coat oven baked finish is tough and reliable.

Forward Lifts carry eighteen month parts, five year structural and six months labor warranties.

The Forward I10 is manufactured by the Fortune 300 Dover Corp. VSG division with headquarters in Madison Indiana.  Dover has ISO9001 certified manufacturing factories worldwide.  Dover is the largest lift manufacturer in the world and also owns the Rotary Lift, Direct lift, and Revolution Lift brands.

Forward F12 two post lift is gold certified with a 12,000 pound capacity for raising most passenger cars, trucks and vans.
With two heavy-duty push hydraulic cylinders designed to increase lift performance and minimize down-time.
Cylinders are located in each column concealed within the carriage itself.
Durable powder coat finish provides exceptional protection from the wears a shop will see over the years.
Forward spring operated arm restraints are just one feature that keep these heavy duty lift arms constantly performing at their peak.

Forward Lifts carry eighteen month parts, five year structural and six months labor warranties.

The Forward I10 is manufactured by the Fortune 300 Dover Corp. VSG division with headquarters in Madison Indiana.  Dover has ISO9001 certified manufacturing factories worldwide.  Dover is the largest lift manufacturer in the world and also owns the Rotary Lift, Direct lift, and Revolution Lift brands.